Finding your suitable readers for connecting gas line to dryer is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for connecting gas line to dryer including detail information and customer reviews. Let’s find out which is your favorite one.
766 reviews analysed
1. Cable Matters 3 Prong Dryer Cord, 30 Amp Appliance Cord (NEMA 10-30P to 3-Wire) – 10 Feet
Feature
- DRYER POWER CORD 3 prong fits a standard 30A 3 wire dryer cord outlet
- 3-prong 30A 10-30R outlets are commonly found in an older building or homes built before 1996
- Purchase a longer replacement 3 prong cord to move your dryer to a nearby location
- 3 WIRE DRYER CORD with a 30A NEMA 10-30 plug fits older and most newer dryer models
- Purchase new 3 wire dryer cords for dryers that are often sold without the power cord
- HEAVY DUTY 10 GAUGE 240V dryer cord 3 prong with 10 3 wire copper conductors is compatible with a 30 amp 240V clothes dryer outlet
- SDRT cable jacket on the electric dryer cord incorporates insulated thermoplastic construction
- Supports up to 300V and 140F to prevent overheating
- RUGGED & SAFE with a right-angle dryer plug 3 prong that connects securely into the outlet
- 30A 10-30 plug has side grips to assist in unplugging when necessary
- Ring terminals provide an easy installation and a secure connection
- Strain relief brackets support the weight of the cord at the dryer end
- ELECTRIC DRYER POWER CORD is compatible with older model dryers and many new models that accept a 3 wire cord
- A lifetime warranty and product support provides peace of mind when purchasing this 3 prong power cord
2. Anderson Metals Brass Tube Fitting, Coupling, 3/8" Flare x 1/2" Female Pipe
Feature
- Coupling fitting for connecting two tubes with the same diameter
- Flared tube connection on one side and a female NPT connection on the other
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Operating temperature range of -65 to +250 degrees F
- Resists mechanical pullout for a more secure connection
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Description
This Anderson Metals coupling compression tube fitting is made of brass, has a flared tube connection and a female NPT connection, and is suitable for use with fuel and gas systems. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting can be used with copper, brass, aluminum, or steel tubing to connect two tubes of the same diameter in a straight run. It has a flared tube connection on one end and a female National Pipe Taper (NPT) connection on the other, creating a tighter seal than straight threads. This fitting is part of an assembly that resists mechanical pullout for a more secure connection, and can be assembled and reassembled without affecting the seal. This coupling compression tube fitting has an operating temperature range of -65 to +250 degrees F and is suitable for use with fuel and gas systems, plumbing, refrigeration, and vacuum applications.
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.
Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.
3. Flextron FTGC-YC34-36P 36" Flexible Yellow Epoxy Coated Gas Line Connector with 1" Outer Diameter and 3/4" FIP x 3/4" MIP Fittings, Stainless Steel
Feature
- High BTU Gas Connector with 1″ Outer Diameter
- Yellow/Stainless Steel
- 36″ Long with 3/4″ FIP x 3/4″ MIP Fittings
- Gas Connector is 100% Leak Tested
- Designed and Engineered for Safe, Optimal Flow Rate
- Up to 290K BTU Flow Capacity
- FLEXSHIELD Epoxy Coating Provides Extra Corrosion Protection of Stainless Steel 304
- For Extra High Demand Appliances, Such as Tankless and Commercial Water Heaters
Description
This is a Flextron gas connector from their YC34 series of connectors, which is designed for indoor and is designed as part of a tank less water heater or -valve kit. it has an outer diameter of 1" and an inner diameter of 3/4" and is made of stainless steel coated with a yellow epoxy coating along the entire length of the connector. the coating gives it extra protection against corrosion when it comes in contact with chemicals that are typically found in households. on the ends of this 36" long connecter are a 3/4" fip and a 3/4" mip fitting, made of zinc-plated stainless steel type s45c. the connector is rated for use in the temperature range of -40 f to 150 f and it is certified by csa for use up to a pressure of 0.5 psi. please consult the product information for the flow capacity for this part, for natural gas. the part is certified by commonwealth of Massachusetts, the city of new York and by upc and csa for meeting the amse A112.18.6 and ansi Z21.24, Z21.69 and Z21.75 gas appliances and manufactured homes standards. each connector is 100% tested on leaks before it leaves the factory. the design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. it can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. its flared end fittings result in a metal to metal seal, which is tested to be leak free within a tighten torque of 1040 inch-pounds. the connector can handle external temperatures of 800 f.
4. Washing Machine Hose Stainless Steel Braided Water Supply Line – Burst Proof 2 Pack – Commercial Grade Metric Fittings + Wrench for Easy Installation (8ft)
Feature
- 8 FOOT SET of BRAIDED STAINLESS STEEL – Washing Machine Hoses. Each package includes both a hot and cold, easy to see, color coded hose.
- BURST PROOF up to 1500psi FOR ADDED HOME PROTECTION – Extremely affordable and priced the same as lower quality hoses! UPC CERTIFIED and AB 1953 LEAD FREE- Superior grade 304 stainless steel.
- HOT AND COLD WATER SUPPLY LINE – Each red and blue color coded hose includes octagon shaped fittings for easy installation and removal. Easily identify your hot and cold water supply.
- UNIVERSAL FIT TO ALL WASHING MACHINE BRANDS – Our hoses connect securely to any standard washing machine and standard supply line and includes the washer inserts. Work great for both residential or commercial use.
- WARRANTY FOR ADDED PIECE OF MIND- Each set of washing machine hoses includes a 3 YEAR written warranty and include brass nuts, ferrules and nipples for high quality corrosion protection.
Description
Keep your home and laundry room safe! Introducing the best stainless steel washing machine hoses on the market! Hippohose washing machine hoses are stainless steel washing machine hoses that have octagon shaped fittings for easy installation! No other washing machine hoses on the market compare to the quality of Hippohose. The color coded feature makes it easy for homeowners or contractors to identify which hose is which.
Hippo Hose Features:
1 Set of Washer fill hoses
304 Stainless Steel and commercial grade fittings
Includes rubber washers for installation
AB 1953 LEAD FREE and UPC Certified
3/4-in FGH x 3/4-in Female Garden Hose connections
Red and Blue color coded to insure proper installation
1,500 PSI burst strength
Working temperature 15° F – 158° F.
Includes 3 Year Warranty
5. Southwire 9042SW8801 UL Listed Electrical Outlet Gas Range Adapter Converting A 250 Volt Receptacle for an Electrical Range to a 125 Volt Receptacle for A Gas Range
Feature
- [240V-120v] (250v-125v)] your new gas range will use a 120V plug as opposed to the 220V plug for your previous electric range. This unit is UL listed and allows for an easy plug and play solution to convert that old Plug from a 4 prong 220/240/250 volt plug to a 110/120/125 volt plug
- [Save money] you already had to pay to run a gas line for the new range, save money by doing the switch over yourself with this plug and play solution.
- [Safety listed] UL listed for your safety with built in overload protection provided by a non-replaceable 15 amp fuse
- [Functional design] the 90-degree Plug orientation of the plug allows for the appliance to be closer to the wall and the easy-grip, folding Tee handle allows for easy and safe removal from the 220-volt outlet
- [Technical stuff] UL Listed, 125-Volt/250-volt outlet configuration: NEMA 5-15R (2-pole, 3-wire grounding) 15 amp 125-volt (protected by non-replaceable 15 amp fuse)
- [More details] Plug Configuration: 250-volt 50-amp NEMA 14-50P (4-prong) receptacle: 125-Volt 15-amp NEMA 5-15R (2-pole, 3-wire grounding)
- [Note on voltage]: commonly voltages for 250 Volts Might be referred to as 240 volts, 250 volts, and 220 volts. This unit is rated to 250 volts and will address these applications.
- [Note on what this unit won’t do] sometimes we get questions on if this item will convert an electric range to a gas range. While we wish it would do that, this item will only handle the electrical part of the conversion, you will still need to run a gas line.
Description
Imagine you Just purchased a New gas range to replace that old electric one that came with the house. You budget for someone to come in to run the gas line, but what you Did not take into account is the additional cost of an electrician. That beautiful gas range uses a different receptacle than the old electric stove. Now Southwire has the first product in America That solves this problem and is UL approved. This easy to use Southwire appliance adapter is a safe way to convert an electric range outlet for gas use. Easy-grip Tee handle for easy and safe removal from the 250-volt outlet built in fuse adds overload safety feature plug location + 90-degree orientation allows for appliance to be closer to the wall plug Configuration: 3-pole, 4-wire grounding, 125-volt/250-volt outlet configuration: NEMA 5-15R (2-pole, 3-wire grounding) 15 amp 125-volt (protected by non-replaceable 15 amp fuse)
6. Deflecto Easy Connecting Dryer Vent Hook Up Kit , Flexible Semi-Rigid Aluminum Duct, (HUPK8WA/4)
Feature
- 4″ diameter dryer to vent hook up kit
- Includes 2 hooker upper protectors, 1 semi-rigid aluminum duct and 1 gasket
- Duct twists on hooker upper protectors and slides over dryer vent and outlet pipe
- Protects duct from being smashed behind dryer which can cause unsafe dryer operation and longer drying times
- No clamps, no tools, no tape. Gasket may be needed for proper fit on some dryers
- Semi-rigid Aluminum Duct
- Flexible Strip Gasket
- Duct Twists On Hooker-upper Protectors & Slides Over Dryer Vent & Outlet Pipe
7. Cable Matters 4 Prong Dryer Cord (30 AMP Appliance Power Cord with Dryer Plug/Dryer Power Cord) – 6 Feet (NEMA 14-30P to 4-Wire)
Feature
- 4 PRONG DRYER CORD for a 30A 4-wire dryer connection
- 4-prong 30A 14-30R outlets are commonly found in homes built after 2000 for a dryer power cord 4 prong compatible
- 4 WIRE DRYER CORD with a NEMA 14-30 plug fits most newer dryer models
- Purchase an appliance power cord for a new dryer that is often sold with out the power cord
- HEAVY DUTY 10 GAUGE dryer cord 4 prong is rated to support up to 250V / 7500 watts
- A SDRT cable jacket on the electric dryer cord with insulated thermoplastic construction is rated to support up to 300V to prevent overheating
- RUGGED & SAFE with a right-angle dryer plug that connects securely into the outlet
- 30A 14-30 plug has side grips to assist in unplugging when necessary
- Color-coded cords are designed with molded ring terminals for easy installation
- Strain relief bracket supports the weight of the cord at the dryer end
- ELECTRIC DRYER POWER CORD replacement is compatible with newer model top loader, front loader and steam dryers from Whirlpool, Kenmore, Sears, LG and more
- A lifetime warranty and product support provides peace of mind when purchasing this dryer appliance cord
8. Whirlpool PT400L 4-Feet 4 Wire 30-Amp Dryer Power Cord
Description
Product Description
PT400L Power cord
From the Manufacturer
The 4-Feet dryer cord has a 4 prong plug and includes an adjustable strain relief bracket. The cord has ring terminal connectors that ensure the cord stays connected, and the heavy duty insulation prevents kinking and cracking for long-lasting durability. This UL-listed cord is stringently tested for household safety.
9. Whirlpool PT220L 4-Feet 3 Wire 30-Amp Dryer Power Cord
Description
Product Description
The 4-Feet dryer cord has a 3 prong plug and includes an adjustable strain relief bracket. The cord has ring terminal connectors that ensure the cord stays connected and the heavy duty insulation prevents kinking and cracking for long-lasting durability. This UL-listed cord is stringently tested for household safety.
From the Manufacturer
The 4-Feet dryer cord has a 3 prong plug and includes an adjustable strain relief bracket. The cord has ring terminal connectors that ensure the cord stays connected, and the heavy duty insulation prevents kinking and cracking for long-lasting durability. This UL-listed cord is stringently tested for household safety.
10. BrassCraft CSSD114R-72 X Gas Appliance Connector
Feature
- 3/8 In. ID (1/2 In. OD) x 72 In. corrugated stainless steel with corrosion resistant coating
- Safety+PLUS Excess Flow Valve helps protect against gas fires and explosions – 3/8 In. Female Flare or 1/2 In. MIP connection to gas supply or gas ball valve
- Approved for indoor and outdoor use. 100% Leak Tested
- Use with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures
- CSA certified. Designed, machined & assembled in the USA
Description
BrassCraft’s 3/8 In. Female Flare (1/2 In. MIP) EFV x 1/2 In. MIP x 72 In. Safety+PLUS Gas Appliance Connector is 1/2 In. OD (3/8 In. ID) with a maximum operating capacity of 49,100 BTU’s. This Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. BrassCraft’s stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
Conclusion
By our suggestions above, we hope that you can found Connecting Gas Line To Dryer for you.Please don’t forget to share your experience by comment in this post. Thank you!