Top 9 2 Stainless Steel Ball Valve

This ball valve is made of Stainless Steel 316 for higher corrosion resistance than Brass/copper and has a plastic-covered lever handle for on/off manual control.
This inline valve has a Standard port flow and 2″ female National Pipe Taper (NPT) threads for connecting two male threaded pipe fittings going in the same direction.
It is pressure rated to over 600 pounds per square inch (psi) for cold working pressure (CWP), Over 150 psi for saturated steam.
Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses.Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve and is blocked when the ball is horizontally swiveled 90 degrees,so that the hole of the ball is perpendicular to the opening of the valve.
They are primarily used in air, gas, liquid,chemicals petroleum and steam applications.

Megairon is an International Company for distributing professional pipe, fittings, and valves.
Meets International Organization for Standardization (ISO) standard 9002.

Package Included:
1 Pc x Full Port Ball Valve

This SuperWhole WJ2300V Series ball valve is made of Stainless Steel 316 for higher corrosion resistance than Brass/copper and has a plastic-covered lever handle for on/off manual control. It has PTFE (polytetrafluoroethylene) seats and seals for resistance to chemicals, moisture, and high temperatures. This inline valve has a Standard port flow and 1/4" female National Pipe Taper (NPT) threads for connecting two male threaded pipe fittings going in the same direction. It is pressure rated to over 600 pounds per square inch (psi) for cold working pressure (CWP), Over 150 psi for saturated steam. This mini ball valve is suitable for use in water, oil£¬chemicals£¬petroleum and gas applications.

Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve and is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve.Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter or the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and termed reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe.Ball valves may have a handle or lever that aligns with the ball¡¯s position (open or closed) for manual operation. They are primarily used in air, gas, liquid,chemicals£¬petroleum and steam applications.

SuperWhole International distributes professional pipe, fittings, and valves . Meets International Organization for Standardization (ISO) standard 9002.

Package Included:
1 piece x 2" ball valve

This Series ball valve is made of Stainless Steel 316 for higher corrosion resistance than Brass/copper and has a plastic-covered lever handle for on/off manual control. It has PTFE (polytetrafluoroethylene) seats and seals for resistance to chemicals, moisture, and high temperatures. It is pressure rated to over 600 pounds per square inch (psi) for cold working pressure (CWP), Over 150 psi for saturated steam. This mini ball valve is suitable for use in water, oil,chemicals, petroleum and gas applications.
Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses.
Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve and is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve.
Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter or the valve.
A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and termed reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the ball’s position (open or closed) for manual operation.
They are primarily used in air, gas, liquid,chemicals petroleum and steam applications.

Meets International Organization for Standardization (ISO) standard 9002.

Package Included:
1 piece x2″ ball valve

This ¼” stainless steel motorized ball valve is affordable enough for the home hobbyist, while durable enough for titans of industry. The valve body and stem are made of SS304 steel, which is lead free and safe for drinking water. It actuates using 9V to 24V of DC power, and will fully open or fully close in 3-5 seconds. Once in position, it automatically stops using energy. This is important as it will never overheat.This is a key difference between motorized ball valves and solenoid valves. Most solenoid valves are constantly energized, while these electrical ball valves are not, making them a safer and more eco-friendly option.
The attention to detail in this valve extends beyond the metal. The casing is rated as IP65. This ingress protection rating is used to define how well the casing does at sealing. For U.S. Solid motorized ball valves, they have the highest IP rating possible against solids (6), representing a seal that protects against all solids, even dust. For water, the rating (5) represents seal protection against water spray from all directions. This means the casing and body are all built to last.
Motorized ball valves have a variety of interesting and convenient uses. Many choose to use them in home water systems. They are also a great tool for use in home automation projects. Home brewery systems typically need several of these valves, and the SS304 is great for fermented liquids. Lastly, all of the U.S. Solid motorized ball valves work well with Arduino automation systems.
Specifications
Valve Material: SS304
Ball Seat: PTFE
Seal: EPDM
Close/Open Time: 3-5 Seconds
Working Voltage: 9-24V DC
Max Power: 2W
Max Torque: 2 N m
Max Pressure: 1.0Mpa
Temperature range for Flow Medium: 0°C to 90°C
Ambient Temperature Range: -10°C to 40°C
Enclosure Rating: IP65
Life Expectancy: 80,000-100,000 Cycles
Bore Type: Standard
Thread Type: NPT

Easily installs onto your weldless homebrew kettle setup.
Made of stainless steel that resist corrosion, pressure and wear

Material: stainless steel 304
Size: 1/2″
Maximum working pressure：20000 psi
Working Temperature: -212 to +1472 degrees F
It works well with the Keller and Weld-B-Gone kits, or the Lochmann 1/2″ stainless ball valve. Makes attaching 1/2″ tubing to your equipment easy with the use of one of these barbs.

Package Included: 1 pc built by 7 parts
It works well with the Keller and Weld-B-Gone kits, or the Lochmann 1/2″ stainless ball valve. Makes attaching 1/2″ tubing to your equipment easy with the use of one of these barbs.

The homebrew ball valve is excellently designed and proven reliable. If you have any question or dissatisfaction about the products, pls contact us. If you are interested in purchasing large quantity, welcome to email us to get a good price and product details.

Zurn Engineered Water Solutions is a recognized leader in commercial, municipal, and industrial markets, delivering sustainable building solutions for new construction and retrofit applications. At Zurn we are committed to providing smart solutions that save both time and money. The RK1-BVHD is a 1″ Stainless Steel Ball Valve Handles with Stainless Steel Nut, handles are non-potable (blue).

Description:

A ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it. It is open when the ball’s hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle. The handle lies flat in alignment with the flow when open, and is perpendicular to it when closed, making for easy visual confirmation of the valve’s status.

Specifications:

Material: 304 stainless steel
Port Type: Reduced port

Thread Type: Female x Female

Thread Standard: BSP(British Standard Pipe)

Thread Size: 1/4″, 3/8″, 3/4″, 1″, 1-1/4″, 1-1/2″(optional)

Max. Pressure: 1000PSI

Quantity: 1

Package Includes:

1 x Ball Valve

SHMONO valve, committed to providing each customer with the highest standard of customer service, with the highest value for money in the valves industry.
Our purpose is providing the highest quality shopping experience for customers.

Main Material：304 Stainless Steel
Size：3/8″
End Connection：Thread
Woking Pressure：1000WOG
Certificate：ISO

Advantages：
1.Simple quick tightening joint ensure fast and safe connections.
2.Corrosion-free and rust-free.
3.High Working Pressure: 3/8″ 1000WOG
4.Low Torque, easy to operate.
5.Easy to install to and working with tank or soft tank.
6.Rapid 1/4-turn on/off control.
7.Durable stainless steel body, higher corrosion resistance, rust-free. Plastic-covered lever handle for on/off manual control..

Application：
*Water project in construction.
*Water treatment for swimming pool.
*Water project in pisciculture.
*Irrigation for agriculture.

100% SATISFACTION GUARANTEED
We guarantee that the quality of our products will be checked before shipment.