Nowadays, there are so many products of pvc shut off valve in the market and you are wondering to choose a best one.You have searched for pvc shut off valve in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings pvc shut off valve which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
892 reviews analysed
1. 4" Inline PVC Ball Valve – 4-in Single Handle Shut-Off Valves – Slip Solvent Schedule 40 Pipe Connector – EPDM Seal Schedule 40 End – White Polyvinyl Chloride Piping for Sewer Hose Swimming Pool
2. 2-Pack in-Line Barbed Ball Valve 13mm for 1/2 Inch Tubing .520 ID – Regulate and Shut-Off/On Water Flow
Feature
- ▶ IMPORTANT ◀ BE SURE TO CHECK THE SIZES and BUY the RIGHT VALVE. THIS 13MM BALL VALVE WORKS WITH 1/2″ TUBING WITH 0.520 INSIDE DIAMETER. (If you would like to use these with 1/2″ DRIP IRRIGATION TUBING which has a larger inside diameter .570 to .620, then select the 16mm size valve).
- COMPLETE FLOW CONTROL. 1/2-inch inline ball valves (2 Pack) are the perfect way to regulate the water flow of your aquarium, aquatic or hydroponic systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow.
- FULLY ADJUSTABLE. Adjust the flow anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won’t stick like PVC ball valves.
- VERSATILE. Customize a secondary water zone, create individual dripline control, use as tank valves, drain valves, return valves or in any situation where fluid restriction is needed. For use with aquarium plumbing, pump return line, canister filter, protein skimmer, calcium reactor, phosban reactor, saltwater applications, RV camper and trailers, pex tubing, hydroponics, aquaponics, etc.
- LEAK-FREE SEAL. These non-corrosive plastic flow valve fittings are guaranteed to provided a secure, watertight connection that handles an operating pressure of up to 45 PSI. Constructed to be heat, chemical and wear-resistant assure long term reliability of connections. Confidently install these barbed fittings without clamps by using our Valve Sizing Chart (see photo) to get the perfect fit. Match the ID (Inner Diameter) of your hose or tube with the acceptable IDs listed on the chart.
Description
IMPORTANT: THIS 13MM SIZE VALVE IS **NOT** FOR 1/2″ DRIP IRRIGATION TUBING. FOR 1/2 INCH DRIP IRRIGATION SYSYEMS, BUY OUR 16MM SIZE VALVE.
Product Features:
Simple on-off operation and straight through flow
Operating pressure range 0 to 45 PSI at a temperature to 100°F
Rapid quarter turn on-off operation
Single barb inlet and outlet
For low pressure applications
Things to consider when installing valves in your system include:
Selecting the correct barb size to match your tubing (see sizing chart)
Ensure tubes are connected to both the inlet and the outlet of each valve
Winterize your system if exposed to freezing conditions
Limit your system pressure to a maximum of 300 kPa to ensure all devices and emitters function correctly
3. SharkBite 23036-0000LF 1/2" Ptc x 3/8" Compression Angle Stop Valve
Feature
- INSTALLS IN SECONDS: 1/2 inch push-fit x 3/8 inch threaded compression angle shut off valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal
- PERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications
- COPPER, PEX, CPVC, PE-RT: SharkBite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
- RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications
Description
Product Description
SharkBite1/2″ X 3/8″ Compression Angle Stop Valve We use high quality DZR Lead Free Brass for our 1/2 x 3/8 Quarter Turn Angle Stop Ball Valve. Chrome plated valve for an attractive appearance. Used where a water pipe enters a room allowing easy water shut off for maintenance, repair, installing a toilet pipe valve or faucet to your water system with no need to turn off your main supply valve. CUT. PUSH. DONE. The Shark Bite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the Shark Bite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. Shark Bite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, Shark Bite fittings are the push-to-connect solution for leak-free results.
From the Manufacturer
SharkBite 23036-0000LF Angle Stop 1/2-Inch X 3/8-Inch Compression Lead Free
4. SharkBite 22222-0000LFA Ball Valve 1/2 Inch x 1/2 Inch, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT
Feature
- INSTALLS IN SECONDS: 1/2 inch ball water valve requires no special tools, no soldering, no crimping or glue. Push to connect design provides an efficient application that saves time and money. Just push to create a watertight seal
- VERSATILE: Shark Bite Ball Valve plumbing fittings fit Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination
- LEAD FREE: Made of high quality forged lead free DZR brass.
- QUALITY: Only Shark Bite’s quality and performance is field-proven with more than 550 million connections. Shark Bite is the only push-to-connect brand than can ensure a clean, leak-free connection
- PERFORMANCE: 200 PSI and 200 degrees F. Use in potable water and hydronic heating applications.
Description
Product Description
SharkBite 1/2″ Ball ValveSharkBite uses high-quality brass for our 1/2″ x 1/2″ brass push-to-connect ball valve with a single ball valve handle. The full port ball valve allows water to pass through the valve easily and freely, with the reliable option to turn off the water supply fast! Quick and easy to install a new valve or to fix a leaking water pipe. Our ball valves can be easily rotated after installation making it a cinch to shut off water in an emergency or work in tight spaces.Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no-fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.CUT. PUSH. DONE. The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless-steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue.
From the Manufacturer
SharkBite is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite, and get a grip on your next plumbing project. These fittings are lead free and meet all requirements for plumbing in California and Vermont.
5. SHMONO 1/2” Inline PVC Ball Valve, Compact T-Handle Water Shut-Off Valves, Socket Valve for Irrigation and Water Treatment, 1/2” Slip [Available 3/4”,1”,1.25”,1.5”,2”]
Feature
- PVC MATERIAL – PVC for corrosion resistance, high strength, and less weight than fittings made from metal, saving cost and accelerating the project for the easy installation.
- SOCKET & 150 PSI – Socket connecting to two pipes going in the same direction. Maximum pressure rating of 150 psi at 73°F .
- SAFETY – T-handle for manual on/off control, easy operation
- santoprene seats and stem packing reduce the risk of leakage.
- ASTM – 1/2’’ ball valve, suitable for indoor and outdoor use like with cess-pipe, landscape and irrigation, pool, cold water, venting, waste applications, aquaculture, and other applications.
- DURABLE – Each valve individually tested for maximum safety blow-out proof stem, ageing resistant and long service life.
Description
SHMONO valve, committed to providing each customer with the highest standard of customer service, with the highest value for money in the valves industry.
Our purpose is providing the highest quality shopping experience for customers.
Main Material:Plastic,PVC
Size:1/2″
End Connection:Socket
Woking Pressure:PN16 @ 73F degree
Certificate:ISO
Advantages:
1.Simple quick tightening joint ensure fast and safe connections.
2.Corrosion-free and rust-free.
3.High Working Pressure: 1/2″ PN16 @ 73F degree.
4.Low Torque, easy to operate.
5.Easy to install to and working with tank or soft tank.
6.Rapid 1/4-turn on/off control.
7.Durable PVC body and rugged PP handle.
Application:
*Water project in construction.
*Water treatment for swimming pool.
*Water project in pisciculture.
*Irrigation for agriculture.
How To Use:
First step, clear both end of the valve.
For socket type, there need to use the corresponding glue on the socket wall again with the pipe and stick them together.
For screw type, there need to use teflon tape winding outer thread screw parts, then smooth twist in the threaded.
100% SATISFACTION GUARANTEED
We guarantee that the quality of our products will be checked before shipment.
6. Homewerks VBVP40E4B PVC Ball Valve fittings, 0.75-Inch
Feature
- FUNCTIONALITY: PVC Ball Valve fitting is suitable for use as an inline valve for connecting two pipes going in the same direction and the ball valve is use a spherical disc to control the flow between pipes, tubes, or hoses. Ideal for landscape and irrigation, pool and spa, aquaculture, and general purpose applications.
- PERFORMANCE: This PVC Ball Valve fitting has a maximum operating pressure of 150 PSI at 73 degreed Farenheit.
- COMPATIBILITY: Fits both Schedule 40 and 80 Pipe, EPDM seat seals and o-rings, Slip ends comply with ASTM D2466,
- Meets ANSI / NSF 14 for Plastic Piping System Components
- HOMEWERKS TRUSTED QUALITY: Be confident in the quality and construction of each and every one of our products. We ensure that all our products are produced and certified to regional, national and international industry standards. We are proud of the products we sell you will be too.
Description
Product Description
The Homewerks Worldwide PVC Schedule 40 Ball Valves are used for cold water pressure distribution systems in residential, commercial, agricultural and light industrial applications. This NSF-approved valve features EPDM seats and O-rings and is constructed from durable PVC material. Ideal for applications where space and weight are critical considerations. Homewerks VBV-P40-E4B Ball Valve, PVC Schedule 40, Solvent x Solvent, 3/4-Inch.
From the Manufacturer
Homewerks VBV-P40-E4B Ball Valve, PVC Schedule 40, Solvent x Solvent, 3/4-Inch.
7. Hayward QVC1015SSEW 1-1/2-Inch White QVC Series Compact Ball Valve with Socket End Connection
Feature
- QVC series true union ball valve is compact and lightweight design
- Features PVC construction with EPDM seal O-ring
- Perfect for general service, commercial plumbing, irrigation, swimming pools, water parks, aquariums and OEM applications
- Comes with socket end connection
- Available in white color
- measures 1-1/2-inch in size
Description
Hayward QVC series true union ball valve is compact and lightweight design. Offer convenient on/off operation in small hard to reach places. Features PVC construction with EPDM seal O-ring. Also features Santoprene (TPV) seats. Rated for full 150 PSI pressure. Perform easy 1/4-turn operation. Perfect for general service, commercial plumbing, irrigation, swimming pools, water parks, aquariums and OEM applications. Comes with socket end connection. Available in white color. Measures 1-1/2-inch in size.
8. SHMONO 1/2” Inline PVC Ball Valve, Compact T-Handle Shut-Off Valves, Socket (Slip) – 2 Pack
Feature
- PVC MATERIAL – PVC for corrosion resistance, high strength, and less weight than fittings made from metal, saving cost and accelerating the project for the easy installation.
- SOCKET & 150 PSI – Socket connecting to two pipes going in the same direction. Maximum pressure rating of 150 psi at 73°F .
- SAFETY – T-handle for manual on/off control, easy operation
- santoprene seats and stem packing reduce the risk of leakage.
- ANSI 1/2’’ ball valve, suitable for indoor and outdoor use like with cess-pipe, landscape and irrigation, pool, cold water, venting, waste applications, aquaculture, and other applications.
- DURABLE – Each valve individually tested for maximum safety blow-out proof stem, ageing resistant and long service life.
Description
SHMONO valve, committed to providing each customer with the highest standard of customer service, with the highest value for money in the valves industry.
Our purpose is providing the highest quality shopping experience for customers.
Main Material:PVC
Size:1/2″
End Connection:Socket (Slip)
Woking Pressure:PN16 @ 73F degree
Certificate:ISO
Advantages:
1.Simple quick tightening joint ensure fast and safe connections.
2.Corrosion-free and rust-free.
3.High Working Pressure: 1/2″ PN16 @ 73F degree.
4.Low Torque, easy to operate.
5.Easy to install to and working with tank or soft tank.
6.Rapid 1/4-turn on/off control.
7.Durable PVC body and rugged PP handle.
Application:
*Water project in construction.
*Water treatment for swimming pool.
*Water project in pisciculture.
*Irrigation for agriculture.
How To Use:
First step, clear both end of the valve.
For socket type, there need to use the corresponding glue on the socket wall again with the pipe and stick them together.
For screw type, there need to use teflon tape winding outer thread screw parts, then smooth twist in the threaded.
100% SATISFACTION GUARANTEED
We guarantee that the quality of our products will be checked before shipment.
9. SHMONO 1-1/2” Inline PVC Ball Valve, Compact T-Handle Water Shut-Off Valves, Socket Valve for Irrigation and Water Treatment, 1-1/2” Slip [Available 3/4”,1”,1.25”,2”]
Feature
- PVC MATERIAL – PVC for corrosion resistance, high strength, and less weight than fittings made from metal, saving cost and accelerating the project for the easy installation.
- SOCKET & 150 PSI – Socket connecting to two pipes going in the same direction. Maximum pressure rating of 150 psi at 73°F .
- SAFETY – T-handle for manual on/off control, easy operation
- santoprene seats and stem packing reduce the risk of leakage.
- ANSI 1-1/2’’ ball valve, suitable for indoor and outdoor use like with cess-pipe, landscape and irrigation, pool, cold water, venting, waste applications, aquaculture, and other applications.
- DURABLE – Each valve individually tested for maximum safety blow-out proof stem, ageing resistant and long service life.
Description
SHMONO valve, committed to providing each customer with the highest standard of customer service, with the highest value for money in the valves industry.
Our purpose is providing the highest quality shopping experience for customers.
Main Material:Plastic,PVC
Size:1-1/2″
End Connection:Socket
Woking Pressure:PN16 @ 73F degree
Certificate:ISO
Advantages:
1.Simple quick tightening joint ensure fast and safe connections.
2.Corrosion-free and rust-free.
3.High Working Pressure: 1-1/2″ PN16 @ 73F degree.
4.Low Torque, easy to operate.
5.Easy to install to and working with tank or soft tank.
6.Rapid 1/4-turn on/off control.
7.Durable PVC body and rugged PP handle.
Application:
*Water project in construction.
*Water treatment for swimming pool.
*Water project in pisciculture.
*Irrigation for agriculture.
How To Use:
First step, clear both end of the valve.
For socket type, there need to use the corresponding glue on the socket wall again with the pipe and stick them together.
For screw type, there need to use teflon tape winding outer thread screw parts, then smooth twist in the threaded.
100% SATISFACTION GUARANTEED
We guarantee that the quality of our products will be checked before shipment.
10. SHYOKO 3/4” Inline PVC Ball Valve, Compact T-Handle Water Shut-Off Valves, Female Thread x Female Thread [Available 1/2”,1”,1.25”,1.5”,2”]
Feature
- PVC MATERIAL – PVC for corrosion resistance, high strength, and less weight than fittings made from metal, saving cost and accelerating the project for the easy installation.
- THREAD & 150 WOG – Female threaded for connecting to male threaded pipe fittings. 150WOG working pressure, suitable for irrigation and water supply.
- SAFETY – T handle for manual on/off control, easy operation
- Santoprene seats and stem packing reduce the risk of leakage.
- ASTM – 3/4’’ ball valve, suitable for indoor and outdoor use like with cess-pipe, landscape and irrigation, pool, cold water, venting, waste applications, aquaculture, and other applications.
- DURABLE – Each valve individually tested for maximum safety blow-out proof stem, ageing resistant and long service life.
Description
SHYOKO valve, committed to providing each customer with the highest standard of customer service, with the highest value for money in the valves industry.
Our purpose is providing the highest quality shopping experience for customers.
Main Material:Plastic,PVC
Size:3/4″
End Connection:Thread
Woking Pressure:PN16 @ 73F degree
Certificate:ISO
Advantages:
1.Simple quick tightening joint ensure fast and safe connections.
2.Corrosion-free and rust-free.
3.High Working Pressure: 3/4″ PN16 @ 73F degree.
4.Low Torque, easy to operate.
5.Easy to install to and working with tank or soft tank.
6.Rapid 1/4-turn on/off control.
7.Durable PVC body and rugged PP handle.
Application:
*Water project in construction.
*Water treatment for swimming pool.
*Water project in pisciculture.
*Irrigation for agriculture.
100% SATISFACTION GUARANTEED
We guarantee that the quality of our products will be checked before shipment.
Conclusion
By our suggestions above, we hope that you can found Pvc Shut Off Valve for you.Please don’t forget to share your experience by comment in this post. Thank you!