Finding your suitable readers for hot ballast resistor alfa romeo is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for hot ballast resistor alfa romeo including detail information and customer reviews. Let’s find out which is your favorite one.
788 reviews analysed
1. AC Blower Motor Resistor Kit With Harness – Replaces# 89019088, 973-405, 15-81086, 22807123 Fits Chevy Silverado, Tahoe, Suburban, Avalanche, GMC Sierra, Yukon, Cadillac Escalade HVAC Fan Blower Motor
Feature
- REPLACEMENT AC BLOWER MOTOR RESISTOR KIT WITH HARNESS – Controls the fan speed in your AC and heating system. If you can no longer adjust the air speed with your AC controls or your AC system no longer blows chances are you need a new Blower Motor Resistor. This COMPLETE KIT includes the Blower Motor Resistor and New Wire Harness. The AC Blower Motor Resistor is located on lower passenger side dash and is easily accessible by removing a few screws.
- FITS THESE VEHICLES – With MANUAL AC controls and without rear A/C vents in the center console – 2003-2006 Chevy Silverado 1500, 1500 HD, 2500, 2500 HD, 3500, 3500 HD | Chevy Avalanche 1500 & 2500 | Chevy Suburban | Chevy Tahoe | GMC Sierra 1500, 1500 HD, 2500, 2500 HD, 3500, 3500 HD | GMC Yukon and Yukon XL | Cadillac Escalade ESV, EXT DOES NOT FIT VEHICLES WITH AUTO AC CONTROLS
- REPLACES PART # – 89019088, 973-405, 15-81086, 22807123 on various GMC, Chevy, Cadillac, Chevrolet vehicles from model years including 2003, 2004, 2005, 2006 and 03, 04, 05, 06 with manual AC controls and without rear A/C vents in the center console
- OEM, FIT, QUALITY, FINISH – A direct replacement for your your factory HVAC Fan Blower Motor Resistor. While this is NOT a genuine GM part, it is a direct replacement and easily installs into your AC blower motor. Simply remove the screws that secure the blower motor resistor into the blower, remove the resistor assembly, and install the new resistor in place.
- LIFETIME WARRANTY – This AC Blower Motor Resistor Kit comes complete with a Lifetime Warranty. If the resistor ever fails on your Chevrolet, GMC, Cadillac, or Chevy simply contact us for a replacement.
2. 1280 Pieces 64 Values Resistor Kit, 1% Assorted Resistors 1 Ohm-10M Ohm 1/4W Metal Film Resistors Assortment with Storage Box for DIY Projects and Experiments
Feature
- Resistor Assortment Kit – One set includes the most common resistor values from 1Ω to 10 MΩ, 1280pcs resistors with 68 variety values, 20pcs of each value, give you more choice for your DIY project and electrical experiments.
- Premium Assorted Resistor – ±1% tolerance range, 1/4w metal film and thick metal pins provides better temperature stability and a sturdy connection, low noise and high precision.
- 64 Different Value – The resistor kit include 64 different values, 1Ω, 2.2Ω, 4.7Ω, 5.6Ω, 7.5Ω, 8.2Ω, 10Ω, 15Ω, 22Ω, 27Ω, 33Ω, 39Ω, 47Ω, 56Ω, 68Ω, 75Ω, 82Ω, 100Ω, 120Ω, 150Ω, 180Ω, 220Ω, 270Ω, 330Ω, 390Ω, 470Ω, 510Ω, 680Ω, 820Ω, 1KΩ, 1.5KΩ, 2.2KΩ, 3KΩ, 3.9KΩ, 4.7KΩ, 5.6KΩ, 6.8KΩ, 7.5KΩ, 8.2KΩ, 10KΩ, 15KΩ, 22KΩ, 33KΩ, 39KΩ, 47KΩ, 56KΩ, 68KΩ, 75KΩ, 82KΩ, 100KΩ, 150KΩ, 180KΩ, 220KΩ, 330KΩ, 470KΩ, 560KΩ, 680KΩ, 1MΩ, 1.5MΩ, 2MΩ, 3.3MΩ, 4.7MΩ, 5.6MΩ, 10MΩ .
- Durable Plastic Storage Box – Each value resistor is packed neatly and marked on every row, the whole resistor assortments packed with a handy plastic storage box.
- Great Compatibility – Resistor assortment kit can be applied to Arduino projects and other electronic and electrical experiments.
Description
1280 Pieces 64 Values Resistor Kit, 1% Assorted Resistors 1 Ohm-10M Ohm 1/4W Metal Film Resistors Assortment with Storage Box for DIY Projects and Experiments
Specifications:
Values: 64 values, 20 pieces each value
Tolerance: ±1%
Power: 1/4 W metal film
Quantity: 1280 pieces
Specific parameters:
1Ω, 2.2Ω, 4.7Ω, 5.6Ω, 7.5Ω, 8.2Ω, 10Ω, 15Ω, 22Ω, 27Ω, 33Ω, 39Ω, 47Ω, 56Ω, 68Ω, 75Ω, 82Ω, 100Ω, 120Ω, 150Ω, 180Ω, 220Ω, 270Ω, 330Ω, 390Ω, 470Ω, 510Ω, 680Ω, 820Ω, 1KΩ, 1.5KΩ, 2.2KΩ, 3KΩ, 3.9KΩ, 4.7KΩ, 5.6KΩ, 6.8KΩ, 7.5KΩ, 8.2KΩ, 10KΩ, 15KΩ, 22KΩ, 33KΩ, 39KΩ, 47KΩ, 56KΩ, 68KΩ, 75KΩ, 82KΩ, 100KΩ, 150KΩ, 180KΩ, 220KΩ, 330KΩ, 470KΩ, 560KΩ, 680KΩ, 1MΩ, 1.5MΩ, 2MΩ, 3.3MΩ, 4.7MΩ, 5.6MΩ, 10MΩ
Note:
1. Please note that there is no separate bag for each resistance value, but each value bundled separately and with a clear mark on it.
2.CHOKING HAZARD — Small parts, please keep away from children under 3 years.
Product Guarantee:
If there is any problems of our product, please contact with us freely for the refund or replacement, we will be reply you within 12 hours.
3. AUSTOR 925 Pieces 37 Values 5% Carbon Film Resistors Assortment Kit, 0 Ohm-1M Ohm 1/4W Resistor for DIY Projects and Experiments
Feature
- Specific parameters: 0 ohm – 1M ohm 37 different and useful values, tolerance range ±5%, power 1/4 watt, carbon film coating
- Standard values: 0 Ω，10 Ω, 22 Ω, 33 Ω, 47 Ω, 51 Ω, 68 Ω, 82 Ω, 100 Ω, 220 Ω, 330 Ω, 470 Ω, 510 Ω, 680 Ω, 820 Ω, 1K Ω, 2.2K Ω, 3.3K Ω, 4.7K Ω, 5.1K Ω, 6.8K Ω, 8.2K Ω, 10K Ω, 22K Ω, 33K Ω, 47K Ω, 51K Ω, 68K Ω, 82K Ω, 100K Ω, 220K Ω, 330K Ω, 470K Ω, 510K Ω, 680K Ω, 820K Ω, 1M Ω
- Advantage: all the values with individual package and mark, each value was print on the corresponding bag, attached with a color code guidance, assist with you read the right resistance value
- Useful assortment: 37 different values, 25 pieces for each one, totally 925 pieces carbon film resistors kit
- Applicability and compatibility: apply to various of electronic DIY projects, including Arduino
Description
AUSTOR 925 Pieces 37 Values 5% Carbon Film Resistors Kit
Specifications
Values: 37
Tolerance range: ±5%
Power: 1/4 watt
Carbon film coating
Advantage
all the values with individual package and mark, each value was print on the corresponding bag, attached with a color code guidance, assist with you read the right resistance value.
Applicability and compatibility
apply to various of electronic DIY projects, including Arduino.
Package include
25 Pieces each of the following 37 standard values:
25pcs * 0 Ω ± 5%
25pcs * 10 Ω ± 5%
25pcs * 22 Ω ± 5%
25pcs * 33 Ω ± 5%
25pcs * 47 Ω ± 5%
25pcs * 51 Ω ± 5%
25pcs * 68 Ω ± 5%
25pcs * 82 Ω ± 5%
25pcs * 100 Ω ± 5%
25pcs * 220 Ω ± 5%
25pcs * 330 Ω ± 5%
25pcs * 470 Ω ± 5%
25pcs * 510 Ω ± 5%
25pcs * 680 Ω ± 5%
25pcs * 820 Ω ± 5%
25pcs * 1K Ω ± 5%
25pcs * 2.2K Ω ± 5%
25pcs * 3.3K Ω ± 5%
25pcs * 4.7K Ω ± 5%
25pcs * 5.1K Ω ± 5%
25pcs * 6.8K Ω ± 5%
25pcs * 8.2K Ω ± 5%
25pcs * 10K Ω ± 5%
25pcs * 22K Ω ± 5%
25pcs * 33K Ω ± 5%
25pcs * 47K Ω ± 5%
25pcs * 51K Ω ± 5%
25pcs * 68K Ω ± 5%
25pcs * 82K Ω ± 5%
25pcs * 100K Ω ± 5%
25pcs * 220K Ω ± 5%
25pcs * 330K Ω ± 5%
25pcs * 470K Ω ± 5%
25pcs * 510K Ω ± 5%
25pcs * 680K Ω ± 5%
25pcs * 820K Ω ± 5%
25pcs * 1M Ω ± 5%
Note
CHOKING HAZARD — Small parts, DO NOT for children under 3 years.
Product Warranty
Austor Direct Customer Service Team is dedicated to offering our valued customers a great and professional services – Timely email reply, Helpful solutions, Refund & Return Warranty.
All Austor products supply 45 days money-back & 18-month warranty. Any questions you have, please don’t hesitate to contact us. We will get you back within 24hours.
4. EDGELEC 100pcs 220 ohm Resistor 1/4w (0.25 Watt) ±1% Tolerance Metal Film Fixed Resistor, Multiple Values of Resistance Optional
Feature
- Metal Film Resistor: Excellent Noise Suppression, Moisture-Proof, High Temperature Resistance And Long Working Life.
- ±1% Tolerance range: Maintaining Sccuracy Over Time
- Product: 220 ohm 1/4w (0.25watt) -100 pcs
- Aaxial-Lead Resistors: Wide Variety Of Applications: Arduino, Electronic And Electrical Experiments
- Anti-static Bag Sealed Packaging: Easy to preserve and use.
Description
100pcs – 220 ohm – 0.25 Watt (1/4W) Metal Film Resistor
* Maximum Diameter Of Section: 6mm (±0.5mm)
* Length (Excluding Lead): 2.3mm (±0.3mm)
5. AUSTOR 1050 Pieces Resistor Kit 38 Values 1% Resistors 0 Ohm-1M Ohm 1/4W Metal Film Resistors Assortment for DIY Projects and Experiments
Feature
- Specific parameters: 38 values, including 4 common values(100 Ω, 220 Ω, 1k Ω, 10k Ω) and 34 ordinary values
- tolerance range ±1%
- power 1/4W
- metal film
- Standard values: 100 Ω, 220 Ω, 1k Ω, 10k Ω, 0 Ω, 10 Ω, 15 Ω, 22 Ω , 30 Ω , 39 Ω, 47 Ω, 68 Ω, 75 Ω, 150 Ω, 270 Ω, 330, 360 Ω, 470 Ω, 510 Ω, 680 Ω, 2k Ω, 2.2k Ω, 3.3k Ω, 4.7k Ω, 5.1k Ω, 6.8k Ω, 15k Ω, 22k Ω, 30k Ω, 47k Ω, 51k Ω, 68k Ω, 100k Ω, 220k Ω, 300k Ω, 470k Ω, 680k Ω, 1M Ω
- Convenient and useful: each value with individual package and mark, all the resistors were collected in a plastic storage box, attached with a color code guidance, assist with you read the right resistance value
- Great compatibility: apply to various of electronic DIY projects and electrical experiments, including Arduino
- Package include: 50 pieces for 4 common values, 25 pieces for 34 ordinary values, 1050 pieces in total
- a free box for easy collect and fetch
Description
AUSTOR 1050 Pieces 38 Values 1% Resistor Kit
Features
Values: 38
Tolerance range: ±1%
Power: 1/4 watt
Metal film
Quantity: 1050 pieces in total
Great compatibility
apply to various of electronic DIY projects and electrical experiments, including Arduino.
Package include
50pcs * 100 Ω ±1%
50pcs * 220 Ω ±1%
50pcs * 1k Ω ±1%
50pcs * 10k Ω ±1%
25pcs * 0 Ω ±1%
25pcs * 10 Ω ±1%
25pcs * 15 Ω ±1%
25pcs * 22 Ω ±1%
25pcs * 30 Ω ±1%
25pcs * 39 Ω ±1%
25pcs * 47 Ω ±1%
25pcs * 68 Ω ±1%
25pcs * 75 Ω ±1%
25pcs * 150 Ω ±1%
25pcs * 270 Ω ±1%
25pcs * 330 Ω ±1%
25pcs * 360 Ω ±1%
25pcs * 470 Ω ±1%
25pcs * 510 Ω ±1%
25pcs * 680 Ω ±1%
25pcs * 2k Ω ±1%
25pcs * 2.2k Ω ±1%
25pcs * 3.3k Ω ±1%
25pcs * 4.7k Ω ±1%
25pcs * 5.1k Ω ±1%
25pcs * 6.8k Ω ±1%
25pcs * 15k Ω ±1%
25pcs * 22k Ω ±1%
25pcs * 30k Ω ±1%
25pcs * 47k Ω ±1%
25pcs * 51k Ω ±1%
25pcs * 68k Ω ±1%
25pcs * 100k Ω ±1%
25pcs * 220k Ω ±1%
25pcs * 300k Ω ±1%
25pcs * 470k Ω ±1%
25pcs * 680k Ω ±1%
25pcs * 1M Ω ±1%
1 * Color Code Guide
1 * Plastic case
Note
CHOKING HAZARD — Small parts,DO NOT for children under 3 years.
Product Warranty
Austor Direct Customer Service Team is dedicated to offering our valued customers a great and professional services – Timely email reply, Helpful solutions, Refund & Return Warranty.
All Austor products supply 45 days money-back & 18-month warranty. Any questions you have, please don’t hesitate to contact us. We will get you back within 24hours.
6. iBrightstar 50W 6ohm Load Resistors – Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code
Feature
- 2Pcs 50W 6ohm Load Resistors + 4pcs Quick wire Clip.
- Prevent LED Turn Signal Lights or LED License Plate Lights from hyper flashing, malfunction or trigger warning message on dashboard.
- NOTICE! Load Resistors heat up like light bulbs and get super HOT when working. Make sure you mount them away from any wires or plastic.
- One resistor is required for each turn signal bulb or each license plate light bulb.
- Easy installation. Just connect the wires with the splice taps provided and no wire cutting is necessary.
Description
Prevent LED Turn Signal Lights or LED License Plate Lights from hyper flashing, malfunction or trigger warning message on dashboard.
Warranty: iBrightstar Warranty for 1 year from date of purchase. Warranty type: Exchange or replacement.
IMPORTANT NOTICE! Load Resistors heat up like light bulbs and get super HOT when working. Make sure you mount them away from any wires or plastic.
iBrightstar is a registered brand with Amazon. Please contact us if there is any questions or other requests!
7. DEYUE 0 Ω to 1 Mega Ohm Resistors Assortment Kit of 1 Percent Tolerance| Metal Film Resistor/Variety Pack of 605 Pcs/Plastic Box | Fits Excellently to Breadboards/Arduino Projects
Feature
- ±1%tolerance, 1/4w, metal filmed
- Quality certified and quantity sufficient to bring you the easit high end shopping experience
- A wide range of commonly used choices of resistance value, quantity of each resistance value distributed based on our professional users’ data analysis, a real all-in-one deal for you
- Exclusively well organised and packed by value of the resistors, with the ends protected by specifically designed yellow bands, help you get rid of the messy headache, to make sure this is not only the perfect product, but also the perfect choice for you
- Comes with the Color Code Guide printed in color to provide you the the most user-friendly experience
Description
DEYUE resistor kit
Having a hard time searching for the right resistors for your Arduino projects?
Couldn’t find the right resistance value for your electronic or electrical experiments?
We understand your needs!
FEATURES:
1/4 W
Metal film
1% tolerance
Color code guide
RoHS certification
Plastic box
COMPONENTS INCLUDES:
50pcs 0 Ohm ±1%
50pcs 10 Ohm ±1%
50pcs 20 Ohm ±1%
50pcs 47 Ohm ±1%
50pcs 100 Ohm ±1%
50pcs 220 Ohm ±1%
50pcs 1k Ohm ±1%
50pcs 10k Ohm ±1%
25pcs 470 Ohm ±1%
25pcs 2.2k Ohm ±1%
25pcs 4.7k Ohm ±1%
25pcs 22k Ohm ±1%
25pcs 47k Ohm ±1%
25pcs 100k Ohm ±1%
25pcs 220k Ohm ±1%
15pcs 470k Ohm ±1%
15pcs 1M Ohm ±1%
8. uxcell 2 Pcs Aluminum Case Resistor 100W 600 Ohm Wirewound Green for LED Replacement Converter 100W 600RJ
Feature
- 100 Wattage and 600 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
- Aluminum Housed. An insulated cover on the wounded wires would block out the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
- This 100W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
- Board length 2.32 inches(59mm) and two rods with 2mm hole for a soldering connection. Dia. 3.2mm antisymmetric anchoring hole for holding, which will fit #2 Screws(or M2.3 nuts)
- Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
Description
100 Wattage and 600 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
Aluminum Housed. An insulated cover on the wounded wires would block out the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
This 100W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
Board length 2.32 inches(59mm) and two rods with 2mm hole for a soldering connection. Dia. 3.2mm antisymmetric anchoring hole for holding, which will fit #2 Screws(or M2.3 nuts)
Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
Specification:
Main Body Length: 59 mm/ 2.32 inches
Power: 100 Wattage
Rated Resistance: 600 R
Tolerances: 5%(J)
Connection Type: Rod terminals with hole
Rod Length: 12mm/0.47 inches
Screw Hole: 3.2mm(Fit #2 or M2.3 nuts)
Distance between screw hole: 45mm
Weight: 58g/2.04 Oz
Materials: Nickel alloys Wire Wound Resistor with Aluminum Case
Color: Green
Package Content:
2 x 100W 600R Aluminum Housed Resistor
Conclusion
By our suggestions above, we hope that you can found Hot Ballast Resistor Alfa Romeo for you.Please don’t forget to share your experience by comment in this post. Thank you!
