Top 10 Diy Power Washer Soap

The Briggs & Stratton 6214 Pressure Washer Cleaning Solution Siphon Hose and Filter is used to siphon detergent out of a separate container. For use with most brands of pressure washers, this kit also includes a filter to ensure no contaminants enter the pressure washer pump. Help keep your outdoor power equipment running at peak performance by ordering the Briggs & Stratton 6214 Pressure Washer Cleaning Solution Siphon Hose and Filter. Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines. Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them also ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations. For more than a century, Briggs & Stratton branded engines and power equipment have helped consumers get the job done. Known for hard-working, dependable, efficient products, Briggs & Stratton is the world’s largest producer of gasoline engines for outdoor power equipment. Briggs & Stratton products are designed, manufactured, marketed and serviced in over 100 countries on all seven continents. Visit www.amazon.com/briggsstratton for more information on Briggs & Stratton and our extensive line of products.

The PowerBoss 3100 PSI pressure washer is built for the hardworking, DIY homeowner looking to get the job done effectively and efficiently. A durable Honda GC190 engine is ideal for medium duty use at home or on the job site, while a maintenance free axial cam pump with Easy Start technology provides easy, low effort starting. Included with the unit are 4 quick connect spray tips for precise cleaning control. The 0 Degree spray tip has a concentrated spray for stain removal and for second stories. The 15 Degree spray tip is great for cleaning surfaces such as concrete, asphalt, vinyl siding and hard woods. The 40 Degree spray tip has a wide fan spray for cleaning delicate surfaces such as cars, boats, and soft woods. The low pressure soap spray tip should be used for applying cleaning detergents. A 1 gallon onboard detergent tank, 10 pneumatic wheels and 25 foot high pressure hose make outdoor cleaning even faster and easier.

★Including sewer jet hose, laser sewer jet nozzle (button nose), rotating sewer jetting nozzle, M22 female to 1/4 inch female NPT coupler and 1/4 inch quick connect plug. Working Pressure is rated to 4400 PSI. Burst Pressure is rated to 11000 PSI.

★Sewer jet hose is ISO 9001 Certified and it is made of 3 parts. Inner tube is made of thermoplastic polyester. Cover layer of is made of thermoplastic polyurethane, able to resist oil, weather, ozone, and abrasion. Reinforcement layer is chemically bonded of 1/4 high tenacity polyester textile braid. Sewer jetter hose has a solid end which connects to sewer nozzle. The other end is swivel which releases stress between sewer hose and gun / pressure washer oulet. 

★Rotating sewer jet nozzle has 3 backward spouts that is easy to slide into drain pipes and sewer lines. The orifice is 4.5. Laser nozzle has 1 front jet and 3 rear jets. The 1 front jet at 0°spray angle can clear blockages and 3 rear jets at 33°spray angle can flush out debris loosened by the front jet. The orifice is 4.0.

★The sewer jetter hose can connect to pressure washer pump with M22 coupler (female M22 to female 1/4” NPT). It can also connect to trigger gun or pressure washer wand with 1/4” quick disconnect plug.

★If you have questions, contact us at any time. We provide a service of quick reply within 10 hours. Welcome to RIDGE WASHER to see other pressure washer accessories.

Hose Construction

Inner Tube: Thermoplastic polyester tube
Reinforcement: One layer 1/4″ high tenacity polyester textile braid that is chemically bonded
Cover: Black thermoplastic
Temperature Range: -40°F / +160°F
Application
1.Button nose sewer jetter nozzle: 1 front jet at 0° spray angle can clear blockages. 3 rear jets at 33° spray angle can flush out debris loosened by the front jet.
2.Rotating sewer jet nozzle: 3 backward rotating spray blasts into clogged pipe and moves the nozzle through pipe.
The nozzle is easy to slide into drain pipes and sewer lines. It offers an even cleaning and flushes out debris.

Package List
Sewer jet hose * 1（100FT）
Rotating sewer jet nozzle * 1
Button nose sewer jetter nozzle *1
Coupler (female M22 to female 1/4’’ NPT) * 1
1/4’’ quick disconnect plug * 1

The Tokharoi 50 Ft sewer jetter for pressure washers is designed to thoroughly clean main drains, landscaping drains and septic field lines .
Helps you thoroughly scrub and flush larger drains that have long-sweep sewer elbows.

For pressure washers rated up to 4.0 GPM and up to 4000 PSI
Cover: Black thermoplastic polyurethane that is oil, weather, ozone, and abrasion resistant
Rated water temperature: up to 160 Degrees F
Sewer Jetter hose ID: 0.3 IN
Sewer Jetter hose OD: 0.5 IN
Nozzle OD (widest point): 0.8 IN
Nozzle Orifice Diameters (x4): 0.04 IN
Nozzle-end length (nozzle and threaded fitting): 2.75 IN
Pressure washer adapter and nozzle are removable to expose 1/4 NPT male threads

Note: Applicable to all standard M22 interface pressure washer and 1/4”fast connection pressure washer gun

IMPORTANT:
1. The water temperature should not be too high.Rated water temperature: up to 160 Degrees F
2. Keep away from children
3. Water pressure is too high, do not shoot at the human body

The JetSnake™ professional grade sewer jetter helps you thoroughly clean more sizes of drains, from 1-1/2″ ID to 4″ ID. Helps remove stubborn clogs from main sewer drains, indoor lateral lines, landscaping drains, outdoor drain tiles and septic field lines. Flexible, higher-strength sewer jetter hose has a steel braided center jacket that retains an ultra-compact nozzle end – with unbeatable cleaning force, yet up to 70% more compact than generic poly hose jetters.

IMPORTANT INFORMATION:

• For your cold-water, GAS PRESSURE WASHER (sold separately) rated up to 4.2 GPM and up to 4,200 PSI. DO NOT attempt to connect to an electric pressure washer or directly to a garden hose.
• COMPARE and MATCH the TWIST FITTING on your TRIGGER GUN with the trigger gun image at the top of this page before ordering.
• To avoid clogging the sewer jetter nozzle with debris from open hoses, always FLUSH ALL SUPPLY HOSES and YOUR TRIGGER GUN with CLEAN WATER for 30 SECONDS before attaching the sewer jetter.
• Before ordering, confirm that a low-cost drum auger (Cobra 86250 or similar) can pass its FULL LENGTH into the drain opening; if your drum auger can’t pass through the drain, the sewer jetter also WON’T PASS THROUGH.
• Sewer jetters usually can’t pass directly through toilets, bathtub drains, sink traps or laundry drain traps so you may need to REMOVE THE FIXTURE OR TRAP, or use an ALTERNATE DRAIN OPENING to reach the clog.
• DO NOT USE in clay (ceramic) pipes, Orangeburg (tar composite) pipes, drains that could have tree roots, rocks, or pipes with preexisting structural damage.
• If you remove the nozzle to clean it, use a soft cloth to clean the exposed male hose fitting threads, sparingly apply removable THREAD SEALANT (sold separately) to the 2nd-4th rows of male threads, re-install the nozzle, and allow to set overnight before pressurizing.