Finding your suitable readers for disconnecting gas line from dryer is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for disconnecting gas line from dryer including detail information and customer reviews. Let’s find out which is your favorite one.
913 reviews analysed
1. BrassCraft CSSD114R-72 X Gas Appliance Connector
Feature
- 3/8 In. ID (1/2 In. OD) x 72 In. corrugated stainless steel with corrosion resistant coating
- Safety+PLUS Excess Flow Valve helps protect against gas fires and explosions – 3/8 In. Female Flare or 1/2 In. MIP connection to gas supply or gas ball valve
- Approved for indoor and outdoor use. 100% Leak Tested
- Use with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures
- CSA certified. Designed, machined & assembled in the USA
Description
BrassCraft’s 3/8 In. Female Flare (1/2 In. MIP) EFV x 1/2 In. MIP x 72 In. Safety+PLUS Gas Appliance Connector is 1/2 In. OD (3/8 In. ID) with a maximum operating capacity of 49,100 BTU’s. This Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. BrassCraft’s stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
2. Dormont 0240892 Gas ApplianceConnectorKit 48 In. Long 5/8 In. Outlet Diameter Yellow Coated
Feature
- COMPLETE GAS RANGE INSTALL KIT: “Safety Shield” coated gas range or furnace installation kit
- LEAK TESTED GAS KIT: 5/8-Inch OD x 48-Inch length coated stainless steel gas connector
- GAS INSTALLATION KIT INCLUDES: two 1/2-Inch MIP (tapped 3/8-Inch FIP) brass adapters and one 3/4-Inch MIP (tapped 1/2-Inch FIP) adapter
- BEST GAS DRYER CONNECTOR KIT: Made in the USA. Everything you need to hook up your gas dryer
- Kit also includes one pipe thread sealant one leak test kit and one detailed installation guide
Description
Product Description
Dormont 0240892 Gas Appliance Connector Kit 48 In. Long 5/8 In. Outlet Diameter
From the Manufacturer
This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust Safety Shield coating provides extra corrosion protection from accidental contact with common household chemicals
3. GASPRO 24 feet Natural Gas Hose with 3/8” Male Flare Quick Connect/Disconnect for BBQ Gas Grill- 50,000 BTU Fits Low Pressure Appliance with 3/8” Female Flare Fitting-CSA Certified
Feature
- Hose connection- 3/8″ female flare x 3/8″ male flare quick connect/disconnect. Quick connector – 3/8″ female pipe thread (NPT)x 3/8” female flare quick connect/disconnect to male
- 24 Feet flexible hose used to connect Natural Gas or LP appliances to an existing low pressure supply. 50000 BTU/hour flow capacity
- Functions effectively with natural or LP gas, unites LP grills, natural gas grills and RVs to permanent fuel sources
- Safety – Pass CSA certificate, excellent sealing quality is promised for your safety
- High-capacity natural gas supply hose and comes with dust cap and plug
Description
Which device is suitable for?
Have a Male 3/8″ Flare fitting on the device
➤ RV Grill
➤ Propane Grill Natural
➤ Gas Grill
➤ Gas Fire Pit
➤ Gas Smoker
➤ Outdoor Patio Heater
➤ Pizza oven
How to Connect Your Grill?
♥ Connect the quick connect to the gas line from house – it uses a 3/8″ Female NPT. – need a 3/8″ male NPT from the house.
♥ Use the 3/8″ Female Flare side to grill – need a Male 3/8″ Flare fitting on the grill.
4. Best Brose 1/2" Tubing Pipe KIT 35ft,Corrugated Stainless Steel Tubing with 2 Male Fittings (35)
Feature
- 【Sturdy material 】-The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket,Comes with a 1/2″ MALE Brass fittings on both end,Standard Male and Female Pipe Threads for easy connections
- 【SIZE】 -Length 33FT, ½ “pipe size: 12mm inner diameter x 16mmOD (0.48” inner diameter x 0.63 “outer diameter),Underground gas piping systems
- 【INSTALLATION POSTIONS】- gas line For use with Natural Gas and Liquid Propane applications,Connects any outdoor NG appliance to the gas supply piping for Outdoor underground,The Suitable for burial installation
- 【SCOPE APPLICATION】For use with Natural Gas and Liquid Propane applications,propane fire pit,Natural gas fire pit,gas range,water heater
- 【MEASILY BEND AROUND CORNERS】- Corrugated Stainless Steel Tubing is great for installation of gas appliances. easily snakes into attic and basements areas, around corners and bends, flexible gas line Simply bend around corner without cutting, eliminating need for additional joints and fittings
Description
FEATURES:
Corrugated stainless steel tubing Comes with 1/2′ MALE fittings on both ends it can be installed exposed to indoor light , or it can also be embedded in concrete, or behind the wall in dry wall systems as needed. Underground Installation easier to handle Bends around corners
pipe is 80% lighter than steel pipe,Over 65% faster to install than black pipe, with no need to cut or thread,Due to the flexible nature CSST is much safer than black pipe in an earthquake,Material is cleaner and easier to handle than black steel pipe
√ Hose Length: 33 FT
√ Size: 12mm ID x 16mmOD (0.48″ ID x 0.63″ OD).
√ Material: Material Tubing 304 Stainless Steel With 0.079inch Yellow Polyethylene Jacketing
√ Inlet Diameter: 1/2″
√ Flow Capacity: 100000 BTU/hr
√ Outlet Diameter: 1/2″
√ Install easily: No tool required for connecting
√ Long lasting and easy to use
5. LDR 516 F146 ¼ Inch ID Fuel Line for Small Engines 6-Foot Length
Feature
- For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control
- ¼ inch inside diameter (.64 CM) and ½ inch outside diameter (1.27)
- Custom Extra long 6 Foot Length (1.82) can be cut to size for all your applications
- For use in mowers tractors snow blowers dirt bikes and just about all small engines
- American Made High Quality Rubber Hose Max 60 PSI @ 70 F Max Temperature of 175F/93C
Description
The LDR 516 F146 ¼ Inch ID 6-Foot Bag fuel line is ideal for use as a replacement hose in your small engines. Or anything t6hat requires a fuel line. The American made fuel line measures one quarter inch inside diameter (.64 CM) and has an outside diameter of one half inch (1.27 CM). The extra long 6 foot hose can be cut to lent and can be used for multiple projects. The hose is made from top quality rubber and has a PSI rating of 60 at a temperature of 175 Fahrenheit ( 93 degrees Celsius). Great for all small engines including lawn mowers snow blowers tractors motor bikes and generators. Not for use in under hood applications. Use hose barbs and clamps to secure.
6. Stanbroil One Stop Gas Appliance Hook Up Kit – Brass Gas Ball Valve and Flexible Gas Connector w/Fittings
Feature
- Highly durable, easy to install and use for most gas appliances
- 1/2″ OD x 3/8″ ID, 22″ stainless steel flexible gas connector with 1/2″ Female Flare on both end
- Brass Shut-off valve 1/2 female NPT x 1/2 Male Flare
- 3 different couplings,1/2″ male Flare x 1/2″ NPT, 1/2″ male flare x 3/8″ male NPT, 1/2″ male flare x 3/8″ female NPT
- CSA certified
Description
Along with everything needed for installing most gas appliances
On/off valve provides easy servicing of appliances or summer shutdown
5 Pieces kit includes: 22″ stainless flexible gas connector
1/2″female flare at both ends
1/2″ male Flare x 1/2″ NPT
1/2″ male flare x 3/8″ male NPT
1/2″ male flare x 3/8″ female NPT
Brass shut-off valve with 1/2″ female NPT x 1/2″ male flare
Fit for gas logs, garage heaters, gas stoves and wall mounted heaters
7. Dormont 20-3132-36B 36 in. Long Outlet Diameter Male x 1/2 in. Female Gas Appliance Connector, 1 pack
8. SHINESTAR 12Feet 1/2-inch ID Natural Gas Hose with Quick Connect/Disconnect Fittings & 3/8 Female to 1/2 Male Adapter for Outdoor NG/Propane Appliance
Feature
- 1/2″ ID Hose with 1/2″ Quick Disconnect Plug x 1/2″ Female Flare Fittings & 3/8” Female Flare by 1/2” Male Flare Brass Adapter
- 1/2-inch inside diameter hose has the BTU capacity needed for 30-inch and larger grills for use with natural gas
- Includes the 3/8”Female Flare by 1/2” Male Flare Brass Adapter, allows you to convert NG to 3/8″ male connector propane appliance
- Hose length 12feet, allows you to move gas appliance around. Connects any outdoor NG appliance to the gas supply piping
- Comes with dust cap and plug for protecting the brass fittings
Description
Actually, both natural gas and propane gas can be used in gas grills, but the burning conditions are different. We have 1/2” male flare to 3/8” female flare fittings to convert to your 3/8″ male connector propane appliances.
Natural gas burns a little cleaner than propane gas, and it’s more convenient than a propane tank that always needs to be carefully filled.
Product Specification:
Max Working Pressure :1/2 PSIG
Flow Capacity :100000 BTU/hr
Inlet Diameter :1/2″ NPT
Outlet Diameter :3/4″-16UNF
Certificate :CSA
9. LASCO 10-1215 Flexible Coated Gas Appliance Supply Line, 72-Inch, 3/8-Inch OD Connector with 1/2-Inch MIP X 1/2-Inch FIP Fittings
Description
Product Description
LASCO 10-1215 LASCO 10-1215 Flexible Coated Gas Appliance Supply Line, 72-Inch, 3/8-Inch OD Connector with 1/2-Inch MIP X 1/2-Inch FIP Fittings. For indoor or outdoor use. Yellow safty coating – corrugated stainless steel. For use with natural gas or propane. Connect to gas dryers! Larsen Supply a third generation family owned and operated company with over 80 years of experience has the largest retail plumbing line in the industry today with over 7000 packaged and 16,000 bulk SKU’s. We pride ourselves on service, selection and support! All Lasco merchandise if warranted to be free of manufacturing defects. Please revert to retail place of purchase for resolution of any possible plumbing questions, warranty or defective part replacement.
From the Manufacturer
LASCO 10-1215 Flexible Gas Dryer Connector Line, 3/8-Inch Diameter with 1/2-Inch Fittings, 72-Inch Long. 3/8-Inch X 72-Inch Gas Appliance Connector, Flexible Stainless Steel, Safety Coating, 1/2-Inch Pipe Thread Ends. Indoor or outdoor use. Yellow Safety Coated. Corrugated Stainless Steel. For Use With Natural Gas or Propane. To Connect Gas Dryers.
10. LASCO 10-1259 Flexible Coated Stainless Steel Gas Range Supply Line, 72-Inch, 5/8 Inch ID with 3/4 Inch Pipe Thread Fittings
Feature
- Perect for indoor or outdoor projects
- Premium quality gas hose and fantastic value!
- Yellow safety coated connector
- Bright colored line is easy to use
- Corrugated stainless steel
- Made with durable material to withstand time
- Works as both Natural Gas hose or Propane line
- Great for different types of gas powered projects
- Most commonly used as Gas Range Connector
Conclusion
By our suggestions above, we hope that you can found Disconnecting Gas Line From Dryer for you.Please don’t forget to share your experience by comment in this post. Thank you!