Top 8 Dewalt Service Center Houston

Keep your batteries charged so you can work as long as possible. Use the Ryobi P118 dual chemistry battery charger to keep your Ryobi batteries up to task. Both NiCad and lithium ion batteries can be charged. You don’t need to worry about compatibility as long as you’re working with Ryobi and the One+ system. You can keep track of your battery status with on-board LED charging indicators. Keep this piece of equipment on the walls with keyhole brackets located on the back. Keep it around the house so you can always have a full battery for repairs.This charger, when used in tandem with the full suite of Ryobi tools, is a convenient and valuable addition to anyone’s home.Item ian shipped in bulk packaging.

This is the piece of hardware you need if you have a large number of Ryobi batteries that need charging. The P135 supercharger holds up to six of any Ryobi battery. This is able to charge some models like the P102 in only a half an hour. This particular system optimizes storage space with the convenient carrying handle. You can either lay it flat on its side or vertically on either one of its ends. You can even mount it on a wall with the conveniently located brackets on the back. Imagine the possibilities with all of that extra space freed up.The P135 system even has you covered if you need to charge your smartphone. It has a USB port for anything you’d need using that technology. Leave your dead batteries in the P135 overnight after a long work day, return in the morning, and your fuel cells will be charged and ready to go at it for another day, every day.

If you have lithium ion batteries, you need to charge them. Use the P117. It works with both lithium ion and NiCad batteries, so it can work well with Ryobi models, from the P100 to the P108. Some batteries, like the P102, can be charged in as little as 30 minutes, letting you get to work as soon as possible when they’ve run low. This charger model has a special maintenance mode that keeps your batteries at peak condition after they’ve been fully charged, making sure that they don’t drain and protecting them from power surges. This system will also cease to charge at the battery’s full charge, saving energy and, subsequently, your power bill. The P117 has a temperature indicator as well. You can use this to gauge how well your batteries will function in your given workplace. This is a heavy duty charger for heavy duty Ryobi users. You will not be disappointed with its performance.

8 in. Variable Speed Grinder with two different grit wheels for sharpening and grinding. It also features a flexible work light, cast iron base for durability, and full size safety shields.
Motor: 5 AMP, 120 Volt, 1 Phase

Shaft Diameter: 5/8 in.

Wheel Dimensions: 8 in.Diameter x 1 in. Thick

Wheel Speed: 2,000 to 3,400 RPM

Wheel Grit: 36 and 60 Grit Wheels

Cord Length: 6 feet

Assembled Depth: 11 in.

Assembled Width: 16 1/2 in.

Assembled Height (not including light): 12 1/2 in.

Base Dimensions: 7 1/2 in. Depth x 9 3/4 in. Width

The DEWALT DCB609 20V/60V max* flexvolt 9.0Ah battery features 180 Watt hours of energy in each battery pack, and 6x the runtime compared to DCB201 1.5Ah battery. It offers 9.0 Ah capacity when used in a 20V max* tool. This battery also has a LED state of charge display so you can always know your battery remaining run time. This battery is compatible with all 20V max*, 60V max* and 120V max* tools – and also compatible with all 20V max* chargers.

The Dyna-Glo Delux 80,000 BTU Portable Kerosene Forced Air Heater is ideal for outdoor/indoor construction, as well as industrial & commercial applications, making it an excellent choice for your portable heating needs. It requires little to no assembly, is 98% fuel efficient, and covers areas up to 1,900 sq. ft. Included are temperature limit controls, a thermostat, flameout sensor, and run-time fuel gauge. All Dyna-Glo Delux Kerosene Forced Air Heaters are CSA certified for multi-fuel use with these fuel types: K1 Kerosene, Diesel #1, Diesel #2, Fuel Oil #1, Fuel Oil #2, Jet A and JP-8. However, K1 Kerosene is the manufacturer’s recommended fuel for optimal, cleaner burns and long lasting product life. Comfort Control Thermostat Run Time Fuel Gauge Dual Source Power Cord Easy Lift Carrying Handle & Cord Wrap Flameout Sensor Sturdy, Rugged Construction

The Ridgeline vented and non-vented Cap style hard hats have been tested and pass for reverse orientation. This hard hat is made from ABS material, this thermoplastic resin is a lightweight material that combines strength and rigidity. Low profile design offers a low center of gravity for better balance. Rear padded suspension provides additional level of comfort on the wearers’ Neck. Vented pressure pad keeps the straps in place providing an additional level of comfort. Easy to grasp triangle knob adjusts the suspension from 6.5 to 8-inch hat sizes. Replaceable sweat band padded fabric and polyurethane foam for all day wear. 4-Position harness points allows you to move the harness forward, backward, up or down-allowing for the most optimal position for ultimate comfort. Comparable to the MSA V Gard hard hat. Non-vented meet ANSI Z89.1-2009 standards, type I, Class C, G, and e; vented meet ANSI Z89.1-2009 standards, type I, Class C; CSA Z94.1-05.

Work Hard and Party Hard, wear it proudly and show you know it best!!!

Pyramex ABS material hard hat — Strong, yet ultra-light for seemingly weightless protection means that every cool hard hat leaves the shop with a superior high quality finish that you won’t find anywhere else.
Each hydro dipped hard hat is uniquely dipped by professional using an advanced water immersion printing process that applies the design to the entire outer shell. This revolutionary method of printing means that no two hard hats are ever the same, making the one you receive truly unique to you, while we try to get products to look like the photos above, there might be a very slight variation from the image.
Custom graphic design large hard hat designed for an adult for men and woman
Low profile design — Offers a low center of gravity for better balance with a rear padded suspension — Provides additional level of comfort on the wearers’ neck and you can add replaceable sweat band — Padded fabric and polyurethane foam for all day wear
4-Position harness points — Allows you to move the harness forward, backward, up or down – allowing for the most optimal position for ultimate comfort with Vented pressure pad — Keeps the straps in place providing an additional level of comfort
Easy to grasp knob — Adjusts the suspension from 6 1/2 to 8 and Swinging hinge points — Allows you to find the most comfortable position on the back of your head
Universal accessory slots fit cap mounted earmuffs and accessories
General Specifications:
General Dimensions: 31 cm x 27 cm x 15.2 cm
Shell Thickness: 1.7 mm – 4 mm
Weight: 376 gm
Materials
Shell: high impact ABS
Suspension: HDPE & high impact nylon