Top 9 Adhesive Promoter 3M

3M Adhesion Promoter 4298 is a liquid primer sponge packet used for most low surfaces energy plastics. This would include common low surface energy plastics used for automotive dash and interior trim applications (TPO, PPO, PP, PC, PC + ABS, etc).

4 fl oz / 118 ml bottle of 3M Adhesion Promoter 4298 is a liquid primer used to increases the bond strength between acrylic adhesive tapes and most substrates. Increases the bond strength for most low to medium surface energy plastics. This would include common plastics used for automotive dash and interior trim applications (TPO, PPO, PP, PC, PC + ABS, etc). This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

3M Adhesion Promoter 4298 is a liquid primer sponge packet used for most low surfaces energy plastics. This would include common low surface energy plastics used for automotive dash and interior trim applications (TPO, PPO, PP, PC, PC + ABS, etc). Sponge Applicator Packet 2.5cc per Packet (3 pack) WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

3M 06396 Automotive Adhesion Promoter, Sponge Applicator Packet – 2.5 cc

3M Tape Primer 94 can be used to promote adhesion of 3M tapes to surfaces such polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, metal and painted metal surfaces. Surface Preparation: The bonding surface must be relatively clean and dry. Contaminated surfaces should be cleaned with a 50/50 Isopropyl Alcohol and water mixture. A clean lint-free cloth should be used. Application: Shake 3M primer 94 well before using. Apply a thin uniform coating to the bonding surface using the minimum amount that will fully coat the surface. Allow 3M primer 94 to dry thoroughly before applying tape. This is usually accomplished in 5 minutes at room temperature. Be sure the primed surface remains free from contaminants prior to applying the tape. Porous surfaces may require 2 applications of 3M primer 94 for uniform coverage and good adhesion. Allow first application of primer to dry before applying the second coat. 3M primer 94 may be applied with brush or swab. It can also be applied with a pressurized flow gun, knurled roller or other similar type of application equipment. Clean up: 3M primer 94 can be removed with isopropyl alcohol. Vigorous scrubbing may be required. Note: Carefully read and follow manufacturer’s precautions and directions for use when handling cleaning solvents. Ships ground service only. Hazardous, we will not ship by air freight. Can’t be shipped outside of USA

3M Adhesion Promoter 4298 is a liquid primer sponge packet used for most low surfaces energy plastics. This would include common low surface energy plastics used for automotive dash and interior trim applications (TPO, PPO, PP, PC, PC + ABS, etc). Sponge Applicator Packet 2.5cc per Packet (3 pack) WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

This is part of a full line of Rvinyl recommended appliction tools. Designed for handy Do-IT-Yourself installers of automotive accessories such as window tint, headlight tint, fog light tint, dash kits and vinyl wraps.

3M VHB Tape Universal Primer UV is a priming solution designed for bonding with 3M VHB Tapes. It enables strong, durable bonds on surfaces like polypropylene, ABS, PET/PBT blends and other difficult to stick to substrates while improving a manufacturer’s environmental, health, and safety profile when compared to using 3M Tape Primer 94.
* 1 pair of 6mil Premium Guard nitrile gloves included