The Best 20 Lb Co2 Kegerator Tank

This Pro Series dual-output double gauge regulator is loaded with high end features! If you plan on dispensing two separate kegs but do not need to have independent keg pressures, then this regulator will work for you. This regulator has a Y splitter with two independent shut off valves, so you can still run a single keg if you want to. The Pressure Adjustment Knob can be turned by hand so it does not require tools. It also features a pressure release valve so you can release pressure from the system at the regulator. This is great a great feature if you have a keg coupler that does not include a pressure release valve.

If you want to set up a draft dispensing system, you need a dependable CO2 tank to provide the appropriate amount of pressure for your lines. This CO2 cylinder is produced from high strength aluminum alloy that is lighter than steel and doesn’t rust. Remember, the tank must be used in a fully upright position, so do not tilt it or lay it on its side. It’s easy to fill; just check out your local listings under “Gas,” or try local fire extinguisher supply or welding supply companies. *Please note: Due to Federal regulations, we cannot ship this tank filled. In other words, when you receive this tank it will be EMPTY.*. In stock and ready to ship. Features: Made of high quality aluminum with a brushed body and unpainted dome. Stamped with required U.S. Department of Transportation (DOT) and Transport Canada (TC) Markings. . Specs: Dimensions: 5 1/4″D x 18″H. Tare Weight: 7.7 lb. Holds 5 lb of gas. Capacity: 6 – 8 half kegs. Service Pressure: 1800 PSI / 124 BAR. Test Pressure: 3000 PSI / 207 BAR. CGA 320 valve. Shipping: Tanks shipped EMPTY. We can not ship these, or any other tank filled.

MRbrew Double Gauge CO2 Keg Regulator, which has been specially designed to provide maximum convenience and durability in busy commercial environments
like bars, tasting rooms, and restaurants.

✮ The MRbrew regulator works with any Co2 Tank with a CGA-320 valve.
✮ Both gauges feature an easy to read design.
✮ The top gauge lets you know how much Co2 Pressure is in the keg and displays 0-60 psi.
✮ The second gauge lets you know how much Co2 gas is left inside the Co2 Tank and features a 0-3000 display.

So you’ll never be caught off guard by an empty CO2 tank again.

✮ This brewery-grade regulator features a multi-stage body for more precise control when making small adjustments to the output pressure.
The first stage reduces the output pressure from the tank to a more manageable pressure, and the second stage fine tunes that pressure for output to the keg

Allowing adjustments to be optimized for the operational range of beer, wine, coffee or whatever you’re dispensing. A large adjustment knob allows you to make
quick and accurate adjustments by hand and turns effortlessly, even in freezing temperatures.

✅ The regulator body is constructed of forged brass with all brass connections and components, a sintered brass inlet filter, integrated nylon tank connection
washer (and spare) and self resetting safety release valve.
✅ 5/16″ barbed output for use with 5/16″ ID hose
✅ Integral safety pressure relief valve releases at 45 PSI
✅ Large hand control makes it easy to adjust the presure inside keg
✅ Inlet nipple has a permanent thick nylon seal that eliminates one source of leaks, so you will not need to use a new fiber washer every time the tank is changed

✮Regulators are all pressure tested to assure reliability in the field

✮What You Get: MRbrew Keg Regulator, Welcome Guide, Our Worry-free 45 Days Money-back 18-month Warranty and Friendly Customer Service.

Please Note: All aluminum CO2 cylinders are sourced from several manufacturers. As a result, the cylinder you receive may have a brushed dome or unfinished dome. We apologize, but we are unable to take special requests at this time.

Designed for applications where one keg of beer or kombucha will be dispensed at a time, Kegco’s LHU51 Elite Series Single Gauge CO2 Draft Beer Regulator features a single 5/16″ barb and a single gauge that indicates how much CO2 pressure is inside of the keg. The regulator’s sophisticated design boasts a bold black gauge with high-contrast red and white text that is both stylish and easy to read, and a matching black plastic handle and black shut-off knob add to the sleek look. The large ergonomic adjustment knob gives you the power to make precise pressure adjustments with ease, between 0-60 PSI. This regulator also features a manual pressure release valve and an internal pressure relief valve that releases pressure at 55-65 PSI to ensure safety, as well as a built-in tank washer that delivers leak-free performance. Constructed from sturdy chrome-plated brass, this regulator has a sintered metal filter built into the stem to keep harmful contaminants out of the regulator, ensuring long-lasting efficiency. A dependable rubber boot on the pressure gauge also helps protect the regulator from damage.

Kegco’s new HL-62 Commercial Grade Dual Gauge CO2 Regulator has been specially designed to deliver maximum convenience and durability in hectic commercial environments like bars, tasting rooms, and restaurants. This double gauge draft beer regulator has a gauge on top that measures CO2 pressure in the keg as well as a gauge on the side that indicates how much CO2 is left in the gas tank, so you’ll never again be caught off guard by an empty CO2 cylinder. Both gauges come equipped with rubber boots that help protect them from damage in the event of a fall, and a large pressure adjustment knob allows you to make quick and precise adjustments by hand. For added safety, this regulator also features an internal safety pressure relief valve that releases when the delivery pressure exceeds set pressure by 15 PSIG, a manual pressure release valve built into the regulator body, and a shut-off valve that makes it easy to quickly shut off pressure to the keg without backing up your beer line. This shut-off valve has a check valve that prevents backflow into the regulator.

WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING.

Aluminum Carbon Dioxide Cylinder with CGA 320 valve installed. Brushed aluminum body with plain dome (colors available), 5 LB capacity, 1800 PSI, DOT-3AL & TC-3ALM designed, high strength aluminum alloy 6061-T6, 5.25 inch diameter, 14.2 inch length, 1.125″ UNF inlet thread.
All cylinders are manufactured in accordance with the U.S. Department of Transportation (DOT) 3AL and Transport Canada (TC) 3ALM requirements. Every cylinder is inspected and tested by a DOT and TC authorized independent inspection agency.

TerraBloom 2 Stage CO2 Regulator is specifically designed for simultaneous use with 2 draft beer/kombucha setups (kegs or fermentation tanks). This CO2 regulator is equipped with 3 gauge displays: 1 for showing the working pressure in your 1st keg or fermentation tank, 1 for showing working pressure in your 2nd keg or fermentation tank, as well as 1 for showing the pressure in your CO2 tank. This regulator attaches to standard North American CO2 gas tanks with a male thread (standard CGA-320 connection). Red knobs on the regulator lets you adjust the working pressure without any additional tools in each individual kegs/fermentation tanks.